Bench-top Spectrophotometer
    CS-800

      CS-800

      CS-800
        CS-800 is a highly performance spectrophotometer
        with test caliber upward. The instrument adopts the
        geometric conditions of D/8 lighting and observation
        of CIE recommendations, integration of the full band
        LED composite light source,double beam optical
        system,ETC real-time calibration technology, spectral
        reflectance standard deviation within 0.08, maximum
        of colorimetric values ΔE*ab is 0.03, to provide all the
        necessary color formula, coating, printing, textile, meet
        plastic, food,medicine, automobile field measurement
        needs.
        Product Introduction：

        CS-800 uses 8/d（8°/diffused illumination）,design the upward test caliber, can measure state of solid,
        samples of different particles, powder, paste etc. easily.
        Solid samples (steel, cloth) can be placed directly on the measurement port, particles (tablets, master
        batch), powder (pigment, coffee), paste objects (tomato sauce) can be placed in a Petri dish, and then placed
        in the mouth of the measurement test.
        Using ETC (Every Test Calibration) real-time calibration technique, in each measurement, the
        spectrophotometer will be to calibrate the system hardware and software.
        This technique solves the problem of long-term stability and measurement data drift color measuring
        instrument fundamentally. Spectral reflectance standard deviation within 0.08, Chroma value Delta E*ab
        maximum value of 0.03, the Inter-instrument agreement is less than 0.2.
        The spectrophotometer can be connected through the use of PC and color management software,
        it is easy to the quality control and color data management of enterprises. The color management of user
        data, compare the color difference, generate test report, to provide a variety of color space data, color
        management of customized customer.
        Specifications
        Illumination d/8(Diffused lighting, 8 degrees observe angle）SCS optical engine（light splitting and integration system），ETC
        （real time calibration technology）,SCI（specular reflection included）/
        SCE(specular reflection excluded）simultaneous measurement。（conform to CIE No.15、 ISO 7724/1、 ASTM E1164、 DIN 5033 Teil7、
        JIS Z8722 Condition c standards）
        Size of integrating sphere Φ40mm，Alvan diffused reflection surface coating
        Illumination Light source CLEDs(entire wavelength balanced LED light source）
        Sensor dual light path sensor array
        Wavelength range 400-700nm
        Wavelength interval 10nm
        Half spectral width 5nm
        Reflectivity range 0-200%
        Reflectivity resolution 0.01%
        Observation angle 2°/10°
        Measurement light source A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,
        F11,F12,DLF,TL83,TL84,NBF,U30,CWF
        Data being displayed SPD distribution/data， sample's color values， color difference
        values/graph， pass/fail results， color error tendency， color simulation，
        display measurement area,history data color simulation，manual input standard sample，generate measurement report
        Measurement time About 1 second
        Measurement time interval 0.5 second
        Measuring caliber Φ11mm
        Color space CIE-L*a*b,L*C*h,L*u*v,XYZ,Yxy,reflectivity,Hunterlab,Munsell MI,CMYK
        Color difference formulas ΔE*ab,ΔE*CH,ΔE*uv,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*94,ΔE*00,ΔEab(Hunter),
        555,color classification
        Other colorimetric indices WI(ASTM E313-00,ASTM E313-73,CIE/ISO,AATCC,Hunter,Taube Berger Stensby),
        YI(ASTM D1925,ASTM E313-00,ASTM E313-73),Tint(ASTM E313,CIE,Ganz),metamerism index Milm, adhesive/changing
        color fastness, ISO luminance,8 gloss, A density, T density
        Repeatability light splitting reflectivity： standard deviation within 0.08%
        color values：ΔE*ab<=0.015（ After calibration, standard deviation of 30 measurements on test
        white board,
        5 second intervals），Maximum： 0.03
        Battery capacity rechargeable, 20000 continuous tests, 7.4V/6000mAh
        Interface USB
        Data storage 40000 test results
        Light source longevity 10 years, 3 million tests
        Inter-instrumentag reement ΔE*ab within 0.2（ BCRA color charts II, average of the 12 charts）
        Size 350*300*200mm(L*W*H)
        Weight About 4.5kg
        Display 5-inch True color screen
        Work temperature range 0~45℃, relative humidity 80% or below（at 35°C）， no condensation
        Storage temperature range -25℃ to 55℃， relative humidity 80% or below（ at 35°C）， no condensation
        Standard accessories AC power line, manual, color management software, drive software, electronic
        manual, color management guide, USB cable, black/white calibration tube,
        electronic color charts
        Optional accessories powder molding device, measurement and test report
        Color matching system Matches
        UV light source Does not include UV light source
        Product Characteristic
        Professional design, powerful instrument functions
        • Test caliber upward, can measure state of solid, samples of different particles, powder, paste etc. easily
        • Φ11mm measuring caliber
        • Uses LED light source; high capacity rechargeable lithium-ion battery 3000000 times in 10 years
        • Can measure both SCI(specular included)and SCE(specular excluded) at the same time
        • Obtained China Metrology Accreditation Certificate
        • 5-inch TFT color screen
        • l USB data transmission, Includes PC software to manage data
        • Large data storage：Can record 40000 test data
        • Modern and fashionable design based on human engineering
        • Easy to use operation modes and compact operation interface
        • Design of low power consumption, large capacity rechargeable lithium battery configuration
        • Can connect to mini-printers for printing
        Technical support
        1. 3 years warranty
        2. If problem in product occurs, we provide temporary replacement machine
        3. We provide metric report for every machine to guarantee the authority of our measurement data,
        and save calibration cost for the user.
        4. Customer service number: 4000727281
    Links：
    Baidu
    map